- 89 -
reamble
: Select the “Short” or “Long” radio button for the preamble
2 GHz Roam
S
and from -60 to100 dBm.
(Default: -80
5GHz Roaming Level (dBm):
is
the roam
fault: -72
aming Be
the beacon lost number to start roaming from 1 to 10. (Default: 3)
i-Fi
M
A
menu is displayed only for the 5GHz band WLAN supported BHTs.
Advanced Settings menu
P
Length. Default
is
“Long”.
.4
et
e
o
et
he
ing Level (dBm):
et the roaming threshold for the 2.4GHz b
dBm)
T
S
he menu displayed only for the 5GHz band WLAN supported BHTs.
ing threshold for the 5GHz band from -60 to100 dBm
dBm).
acon Lost :
(D
R
S
WMM Support:
Se
dio button for the WMM (W
lect the “Enable” or “Disable” ra
a)
ultimedi Function.
Enable: Enable WMM
fault)
Disable: Disable WMM (De
vailable 5GHz Band:
T
Select the same 5GHz bands as the access point.
D
Default
button: Restored the default settings.
pply
button: Applies the changes.
ancel
button: Cancels all changes.
Export WLAN Settings
The Export WLAN Settings is used to create a registry file which contains only the WLAN settings (WLAN
registry file). The WLAN registry file can be copied to other BHT with the registry file (*.reg).
Refer to “6.4.10 Registry Editor (RegEdit)” for how to import the registry file with the Registry file(*reg).
length as the access point. If
e same
p
access
Note
Select the same preamble
both the BHT and access point are not set to th
reamble length, the BHT may not connect to the
point.
A
C
Note
- The network connection time and roaming time can be
icularly when using the DFS
bands (W53 and W56) which require passive scans.
- The DFS bands (W53 and W56) access points
ommunication or electrical
interference.
reduced by using only the necessary bands (uncheck
unnecessary bands), part
automatically alter channels when a weather radar is
ause an unintentional disconnection
detected. This may c
of the wireless LAN c
- Enable the access point function “ANY
Connect”and“802.11d” (Country notification) when using
the DFS bands (W53 and W56).
