- 8 -
2.3. Restoring the registry
Setup procedures for the registry restore varies depending on the backup method as explained below.
Using the backup and restore tool (BHTBackup.exe)
Step 1
Back up data after the initial setup.
Step 2
Select the “File & Registry (BHT Backup)” in the Startup Config
menu. (Refer to “6.4.9 Startup Config” for details.)
Step 3
Perform a full reset (delete the registry).
Step 4
The registry will be restored using the “Backup file auto restore”
(BHTRestore.exe) at full reset.
StartConfig menu
Using the “Registry backup at shutdown” function
Step 1
Perform the “Registry backup at shutdown” function after the
initial setup.
Step 2
Select the “Registry Only” (default) in the Startup Config menu.
(refer to “6.4.9 Startup Config” for details.)
Step 3
Perform a full reset to delete the registry.
Step 4
The registry will be restored using the “Backup file auto restore”
function at full reset.
StartConfig menu
Using the Registry Editor
Step 1
Export a registry file to be replaced after the initial setup.
Step 2
Add ‘_’ (under line) in front of the registry file name.
(The registry file will run invisibly if the file name starts with ‘_’ (under line).
The popup confirmation message will not be displayed when executing the registry file.)
Step 3
Deploy the registry file exported to the "¥Flash¥Setup" folder.
Step 4
Perform a full reset to delete the registry.
Step 5
The registry will be restored using the “Setup application auto execution at full reset” function.
