- 16 -
3.7. Using the MENU key
The
MENU
key is used to set up the BHT basic configuration listed
below.
Step 1
Press the
MENU
key.
Step 2
Select the menu by moving the cursor vertically with the
▲
(up)
or
▼
(down) keys.
The selected menu is highlighted.
Step 3
Set the menu by moving the cursor horizontally by using the
◄
(left) or
►
(right) keys.
To exit this menu, press any one of the three keys, the
MENU
key, the
ESC
key or the
ENT
key.
Menu Description
Value
BEEPER
VOLUME
Adjusts the notification beeper volume
for code scanning completion.
The volume is adjustable in 6 levels.
0: Mute, 1(Low) to 5 (High)
Note: Use the “Volume & Sounds” in the
control panel to adjust the audio sound
volume and change other sound
settings.
Level 0 to 5
VIBRATOR
Enables or disables the vibrator to notify
code scanning completion.
ON or OFF
BRIGHTNESS
Adjusts the LCD brightness in 4 levels.
Level 0 to 3
BRIGHTNESS
(PS)
Changes the LCD brightness for the
power save mode in 2 levels.
Level 0 or 1
POWER SAVE
Set the time for the LCD backlight to dim
when the BHT is not in use.
Use the slider to set the time.
Set the time
in seconds.
(max.600
seconds)
RESET/FULL
RESET
Performs a reset or full reset.
Note: Use the “Reset” menu in the
System Properties to disable the reset
and full reset functions.
(BhtShell>3:System Properties>Reset)
None
TOUCH PANEL Enable or disable the touch panel.
ON or OFF
AUTO
POWER-OFF
TIME
Set the auto power off timer.
If “0” is set, the auto power off function is
disabled. Check the battery level
regularly if set to “0”.
Set the time
in seconds.
(max.600
seconds)
Page 1
Page 2
