MX2600SE Quick Reference Guide
1
ATM Power On/Off
ATM Power On
Open the upper front door.
Press Power Switch in the direction of “I”.
ATM Power Off
Press Power Switch
in the direction of “O”.
2
Security Door Open
Security Door Open
Turn the key clockwise to open the security cover.
The default password of electronic lock is 1-2-3-4-5-6.
Enter this sequence on the electronic lock keypad. (
①
)
.
The lock will confirm a valid combination entry with a
double signal. Lock will signal three (3) times for invalid
combination entry.
Turn the vault door handle counterclockwise. (
②
)
The vault door will open.
3
Opening the Exterior Door
3-1
Opening the upper front body door,
- Insert the key and turn it clockwise. (
①
)
- Pull the front panel outward. (
②
)
3-2
Opening the lower front body door,
- Open the security cover with key. (
③
)
- Unlock the e-lock and open security door. (
④
)
4
Cash Replenishment
4-1
Enter to Supervisor mode (Refer to
“9 OP Main Screen”)
Select
“SETTLEMENT”
Submit
“TRIAL CASSETTE TOTAL”
to
show note count.
*
To show note count and to clear note
count, submit
“CASSETTE TOTAL”
How to add note count,
- Select
“SETTLEMENT”
- Select
“ADD CASH”
- Select the cassette to be added the
notes(
①
)
- Enter the note count and then press
ENTER key in PIN Pad. (If you want to add
the cash for other cassette, repeat from “
①
”)
-
After completing, press “APPLY” button.
4-2
Open the security door.
(Refer to “3 Opening the
Exterior Door”)
Pull out the cash cassette carefully.
Unlock the cassette cover using key (
①
)
.
Pull the push plate back until it is locked
against the push plate latch. (
②
) And then,
set the bills into the cash cassette.
Then, release the push plate from the cash
plate latch and allow it gradually to take up
its position behind the notes. (
③
)
Close the cassette cover with key, place
it carefully on the set guide and push it in
until it is locked in place.
* The above description is based on 1000 new note
capacity cassette. For 2000 new note capacity
cassette, refer to operator manual.
1
2
3
Caution:
The acceptable condition bills should be
loaded (Refer to Operator Manual)
1
2
1
2
3
4
