smartDEN Opener
User Manual
24 Apr 2018
- 82 -
HTTP
Port
- this is the port on which web server and HTTP Protocol will respond. By
default its value is 80. Note that changes on this parameter will take effect after reboot;
Session
Timeout
- web server will need new login if there was no activity for more than
this time.
Session
Timeout
is in minutes and by default is 5 minutes;
Access
IP
- this parameter allows restricting access to web server and HTTP Protocol.
Note that setting
Access
IP
is not enough to restrict access.
Access
Mask
should be
properly set to use this feature as appropriate;
Access
Mask
- Used to restrict access to selected range of IP addresses. If not properly
set connection to web server might be lost!
You can allow the HTTP/XML/JSON access to a range of IP addresses by setting an
appropriate value for
Access Mask
. For example setting the
Access IP Address
to
192.168.1.0 and
Access Mask
to 255.255.255.0 allows the access from IP addresses in
range from 192.168.1.0 to 192.168.1.255.
If you don’t want to restrict the HTTP/XML access by IP address, set the
Access Mask
to 0.0.0.0.
Setting the
Access Mask
to 255.255.255.255 allows the HTTP/XML access only from
the exactly specified
Access IP Address
.
Use
Access
IP
and
Access
Mask
with attention. If not properly configured, connection
to web server might be lost. In such case use default settings button.
IP
Camera
Enable
- this parameter enables displaying IP camera on
Home
Page
. If
enabled animation will be hide and IP camera view will be available. By default this value is
disabled;
Type
of
Streaming
- this parameter gives two choices:
o
Image
- with this
Type
of
Streaming
you should enter a valid
URL
to image of IP
camera. Most IP cameras provide such
URL
which contains picture in real time. The
camera should be public or
URL
have to contain authorization information (might not
work with every browser). Principle of working with this
Type of Streaming
is that
picture is refreshed when previous picture is received (might be fast when good internet
connection is used and slow when the internet connection is slow);
o
Video
- this
Type
of
Streaming
allows streaming video from a valid
URL
of IP camera
(it might be video from another website, too). The camera should be public or
URL
have
to contain authorization information (might not work with every browser);
URL
- this parameter sets the
URL
to the IP camera. It must start with "http://". If non public
camera are used this
URL
should contain authorization information (might not work with all
browsers). If invalid
URL
is typed then in
Home
Page
blank frame will be shown in place of
the animation. There are 120 symbols reserved for this parameter;
RF
Remote
Mode
- this option is provided because of different RF remotes on the market.
There are two modes - Mode 1 and Mode 2, specifying which button on RF remote opens
and which closes the Main Controlled Device. Experiment with this option to find best mode
for your RF remote. By default
RF
Remote
Mode
is Mode 1, which meets RF remotes
shipped with
smartDEN Opener
.
