Denkovi smartDEN Opener, User Manual

Page: 34 / 119

smartDEN Opener User Manual
24 Apr 2018
- 34 -
Figure 6.30. Relays tab
7. Control tab will be shown with states of the two relays and Main Controlled Device. In our
example on Figure 6.30 Relay 1 is OFF, Relay 2 is ON and Main Controlled Device
("Garage Door" in our example) is CLOSED (or STOPPED ). By clicking on status buttons
the state of the relay will be toggled.
8. When click in upper left corner button another available tabs will be visualized ( Figure 6.29 ).
o
Device List - will go to home page and show all devices;
o
Relays - will go to Relays tab where could be obtained state of relays and Main
Controlled Device as well as control them;
o
Digital Inputs - will show state of Digital Inputs;
o
Analog Input - will show the Analog Input measurement;
o
Temperature Input - will show the temperature sensor attached to smartDEN Opener ;
o
Settings - will show screen to edit board settings;