smartDEN Opener
User Manual
24 Apr 2018
- 115 -
Location control could be done with these two modes:
GPS
Inside
- In this mode the output (relay) will be set ON when the user crosses the set
radius entering the perimeter. This is suitable for example when the user approach his
house and want to open some garage door automatically. Please note an internet
connection is required for this command otherwise it won't be executed.
Figure 16.6.
GPS Inside control by location
GPS
Outside
- In this mode the output (relay) will be set ON when the user crosses the set
radius leaving the perimeter. This is suitable for example when the user leaves his work
place and going home an electrical device must be switched ON automatically. Please note
an internet connection is required for this command otherwise it won't be executed.
Figure 16.7.
GPS Outside control by location
