smartDEN Opener
User Manual
24 Apr 2018
- 48 -
10.2.
Menu
The main menu consists of the following items, located on the top of the window frame. There
are seven main menu buttons and three of them have submenus. The screenshot on
Figure 10.4
illustrates the menu bar on wide screen and
Figure 10.5
same menu on mobile screen. A short
description of menu is given below:
Home
- this is monitoring and control page. All peripherals state is shown in real time at this
page;
Garage Door
- this is Main Controlled Device's page. It consist of settings for times of
opening/closing, protection sensor settings, etc.
Week Schedule
- this page allows creating events that will repeat weekly;
I/O Setup
- consist of settings for the digital inputs, analog input, temperature input and
relays;
Settings
- there are five submenus for different settings:
o
General Settings
- settings for HTTP& MQTT access, web server access, device
settings, IP camera settings;
o
Network
- settings for the network (IP addresses, MAC address, DHCP settings, etc.);
o
Date/Time
- settings for date and time (NTP server, auto synchronization, Time zones,
etc.);
o
- settings for email notifications (enable/disable emails, email addresses, etc.);
o
MQTT
- settings for MQTT access (MQTT Broker and Port);
Administration
- this menu consist of four submenus:
o
Firmware Update
- this page provides remote firmware update;
o
Backup
- page for backups and restore settings from
.cfg file;
o
Factory Defaults
- when pressed this submenu button a dialog will open and ask for
confirmation. Use this with attention;
o
Reboot
- when pressed a confirmation dialog will be opened;
Logs
- this menu has two submenus:
o
System Log
- contains log messages (boot time, network connection, date/time
synchronization, etc.);
o
Events Log
- text file containing log information for I/O state changes;
Logout
- clicking this button will end current session and redirect to login page;
Figure 10.4.
Navigation menu (wide screen)
