Denkovi smartDEN Opener, User Manual

Page: 53 / 119

smartDEN Opener User Manual
24 Apr 2018
- 53 -
o
Auto Close - this parameter closes the Main Controlled Device after the time in seconds,
specified by the Auto Close time parameter. This time can be from 1 to 65535
seconds;

Send notification On - this parameter allows sending notification on specified state of the
Main Controlled Device. There are several available options:
o
Never - this option will not send notifications about Main Controlled Device;
o
State Change - this will send notifications on OPENED and CLOSED states;
o
Open - this option will send you notifications on OPENED state;
o
Close - this option will send you notifications on CLOSED state;
Note: Admin User must be enabled and proper MQTT settings applied.

Send Email On - This parameter allows sending emails on specified state of the Main
Controlled Device. There are several available options:
o
Never - this option will not send emails about Main Controlled Device;
o
State Change - this will send email on OPENED and CLOSED states;
o
Open - this option will send you email on OPENED state;
o
Close - this option will send you email on CLOSED state;
Note: Emails must be enabled with proper settings applied.

Log On - This parameter allows logging Main Controlled Device's states. There are several
available options:
o
Never - this option will not log Main Controlled Device's state changes;
o
State Change - this will log OPENED, CLOSED and STOPPED states;
o
Open - this option will log OPENED state;
o
Close - this option will log CLOSED state;
Note: Enable Writing to Logs options must be enabled.

Attach Relay - allows you to control one of the onboard relays depend on the state of the
Main Controlled Device. There are three available options:
o
Nothing - no relay is attached;
o
Relay 1 - if you select this option Relay 1 will be controlled by the Main Controlled
Device. Relay action will be determined from Relay Action option;
o
Relay 2 - this option will attach Relay 2 to Main Controlled Device. Relay action will be
determined from Relay Action option;

Relay Action - if you attach relay to Main Controlled Device, you can choose its action from
these several options:
o
Turn On While Opening and Closing - this option will turn on the relay during the time
the Main Controlled Device opens and closes. This option is suitable for Warning
Lamps;
o
Turn Off While Opening and Closing - this option will turn off the relay during the time
the Main Controlled Device opens and closes;
o
Turn On When Opened - this option will turn on the relay when the Main Controlled
Device is OPENED . Suitable for lamps;
o
Turn Off When Opened - this option will turn off the relay when the Main Controlled
Device is OPENED . Suitable for heaters in the winter;