Expert
Logger
l
Use
Factory default configuration
to reset everything to factory settings,
including the system channels and network settings. This then corresponds
to the device’s condition with the firmware at the time of delivery.
4.4.1.1
Channels overview (Show configuration table)
This window shows, in tabular form, the configurations of all the channels
of the device. Each column contains detailed information such as channel
name, type of module, physical unit, measurement range, or whether an
invalid channel configuration exists, etc. The object ID in the penultimate
column enables you to display the channel configuration as an XML file
(potentially important for support purposes).
The data can be displayed only. Changing settings is not possible. To
change configurations, use the DataService Configurator program.
The following figure shows a channels overview example (extract):
4.4.1.2
View current values (live channel values)
This allows you to display current values of all or a selection of channels
(tracks). In the Filter area you can select the signals or values to be dis-
played. Change the sorting (ascending/descending) by clicking any
column header.
35
Delphin Technology AG
Januar 2018
Expert
Logger
Manual