![Delphin Expert Logger Manual Download Page 171](http://html.mh-extra.com/html/delphin/expert-logger/expert-logger_manual_2471097171.webp)
Expert
Logger
value is exceeded. You can reduce the number of values which are dir-
ected into a memory group.
You can specify the tolerance in the electric unit of the channel or as a per-
centage in relation to the signal’s scaling. In the example, values are only
output if they deviate from the previously output value by more than 1 mV.
4.11.27
Trigger
This software channel uses the signal of an (analogue) source to generate
a logic signal for further processing. Its output is active ("On") after a trig-
ger event (
High level
,
Low level
,
Rising edge
,
Falling edge
or
Edges
(both)
). With
Every high
, every value unequal to 0 is a trigger, and with
Every low
, every value equal to 0 is a trigger.
.
171
Delphin Technology AG
Januar 2018
Expert
Logger
Manual