Expert
Logger
Slave redundancy
can be selected only when a second interface is
available for backup operations. A second interface must run in
PROFIBUS mode. However, no PROFIBUS protocol is allowed to be con-
figured to this connection. The dialogue notifies of any incorrect set-
tings.
The symbol
is then displayed for the channel following configuration.
Then create and configure the required
(Signals).
4.12.4.2
PROFIBUS channel
Creating PROFIBUS channels requires creation of a
in the
PROFIBUS
(subchannel).
Select
Create channel
→
PROFIBUS input
or
PROFIBUS output
from the
(
, PROFIBUS protocol) in
order to create channels for your PROFIBUS signals. A PROFIBUS input
channel is identified by
, and a PROFIBUS output channel by
.
Double-click a PROFIBUS channel or select Properties from the context
menu to display the configuration dialogue. The data to be entered
depends on the signal type that is to be sent to or received from the
PROFIBUS user. (Refer to
). Therefore, obtain
information on the format and settings of relevant PROFIBUS signals
before entering data here.
Refer also to
.
Main settings tab
208
Delphin Technology AG
Januar 2018
Expert
Logger
Manual