4.
If a Mini-Card is not already installed, go to
step 5
. If you are replacing a Mini-Card, remove the existing card:
a.
Disconnect the antenna cables from the Mini-Card.
b.
Release the Mini-Card by pushing the metal securing clips toward the back of the computer until the card pops up slightly.
c.
Lift the Mini-Card out of its connector.
5.
Install the replacement Mini-Card:
a.
Align the Mini-Card with the connector at a 45-degree angle, and press the Mini-Card down into the securing clips until the card clicks into place.
1
antenna cables (2)
2
Mini-Card
3
Mini-Card connector
1
securing clips
2
Mini-Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
1
securing clips
2
antenna connectors (2)
3
Mini-Card connector
NOTICE:
To avoid damaging the Mini-Card, never place cables under the card.
Summary of Contents for XPS M1710
Page 34: ...Back to Contents Page ...