Configuring Host-Based SSH Authentication
Authenticate a particular host. This method uses SSH version 2.
To configure host-based authentication, use the following commands.
1
Configure RSA Authentication. Refer to
Using RSA Authentication of SSH
.
2 Create
shosts
by copying the public RSA key to the file
shosts
in the directory
.ssh
, and write the IP
address of the host to the file.
cp /etc/ssh/ssh_host_rsa_key.pub /.ssh/shosts
Refer to the first example.
3 Create a list of IP addresses and usernames that are permitted to SSH in a file called
rhosts
.
Refer to the second example.
4 Copy the file
shosts
and
rhosts
to the Dell Networking system.
5 Disable password authentication and RSA authentication, if configured
CONFIGURATION mode or EXEC Privilege mode
no ip ssh password-authentication
or
no ip ssh rsa-authentication
6 Enable host-based authentication.
CONFIGURATION mode
ip ssh hostbased-authentication enable
7
Bind
shosts
and
rhosts
to host-based authentication.
CONFIGURATION mode
ip ssh pub-key-file flash:
//filename
or
ip ssh rhostsfile flash:
//filename
Examples of Creating
shosts
and
rhosts
The following example shows creating
shosts
.
admin@Unix_client# cd /etc/ssh
admin@Unix_client# ls
moduli sshd_config ssh_host_dsa_key.pub ssh_host_key.pub
ssh_host_rsa_key.pub ssh_config ssh_host_dsa_key ssh_host_key
ssh_host_rsa_key
admin@Unix_client# cat ssh_host_rsa_key.pub
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEA8K7jLZRVfjgHJzUOmXxuIbZx/
AyWhVgJDQh39k8v3e8eQvLnHBIsqIL8jVy1QHhUeb7GaDlJVEDAMz30myqQbJgXBBRTWgBpLWwL/
doyUXFufjiL9YmoVTkbKcFmxJEMkE3JyHanEi7hg34LChjk9hL1by8cYZP2kYS2lnSyQWk=
admin@Unix_client# ls
id_rsa id_rsa.pub shosts
admin@Unix_client# cat shosts
10.16.127.201, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEA8K7jLZRVfjgHJzUOmXxuIbZx/AyW
hVgJDQh39k8v3e8eQvLnHBIsqIL8jVy1QHhUeb7GaDlJVEDAMz30myqQbJgXBBRTWgBpLWwL/
doyUXFufjiL9YmoVTkbKcFmxJEMkE3JyHanEi7hg34LChjk9hL1by8cYZP2kYS2lnSyQWk=
Security
930
Summary of Contents for S4048T
