manualshive.com logo in svg

Dell S4048T, Configuration Manual

The Dell S4048T Configuration Manual is a comprehensive guide for optimizing and customizing your Dell S4048T network switch. Unlock the full potential of your device with this must-have manual, available for free download from our website. Master your network configuration with ease and efficiency.

Share
Download
background image

  seq 5 permit ip host 23.64.0.5 any

  seq 10 deny ip any any

Dell# show cam layer3-qos interface tengigabitethernet 2/4

Cam   Port Dscp Proto Tcp  Src  Dst SrcIp        DstIp     DSCP   Queue

Index                 Flag Port Port                       Marking

-----------------------------------------------------------------------

20416 1   18    IP   0x0   0    0   23.64.0.5/32 0.0.0.0/0 20     2

20417 1   18    IP   0x0   0    0   0.0.0.0/0    0.0.0.0/0 -      0

20418 1   0     IP   0x0   0    0   23.64.0.2/32 0.0.0.0/0 10     1

20419 1   0     IP   0x0   0    0   0.0.0.0/0    0.0.0.0/0 -      0

20420 1   0     IP   0x0   0    0   23.64.0.3/32 0.0.0.0/0 12     1

20421 1   0     IP   0x0   0    0   0.0.0.0/0    0.0.0.0/0 -      0

20422 1   10    0    0x0   0    0   0.0.0.0/0    0.0.0.0/0 14     1

24511 1   0     0    0x0   0    0   0.0.0.0/0    0.0.0.0/0 -      0

In the previous example, the ClassAF1 does not classify traffic as intended. Traffic matching the first match 
criteria is classified to Queue 1, but all other traffic is classified to Queue 0 as a result of CAM entry 20419.

When you remove the explicit “deny any” rule from all three ACLs, the CAM reflects exactly the desired 
classification.

The following example shows correct traffic classifications.

Dell#show cam layer3-qos interface tengigabitethernet 2/4

Cam   Port Dscp Proto Tcp  Src  Dst SrcIp        DstIp     DSCP    Queue

Index                 Flag Port Port                       Marking

-------------------------------------------------------------------------

20416 1    18   IP    0x0  0    0   23.64.0.5/32 0.0.0.0/0 20      2

20417 1    0    IP    0x0  0    0   23.64.0.2/32 0.0.0.0/0 10      1

20418 1    0    IP    0x0  0    0   23.64.0.3/32 0.0.0.0/0 12      1

20419 1    10   0     0x0  0    0   0.0.0.0/0    0.0.0.0/0 14      1

24511 1    0    0     0x0  0    0   0.0.0.0/0    0.0.0.0/0  -      0

Create a QoS Policy

There are two types of QoS policies — input and output.

Input QoS policies regulate Layer 3 and Layer 2 ingress traffic. The regulation mechanisms for input QoS 
policies are rate policing and setting priority values.

•

Layer 3

 — QoS input policies allow you to rate police and set a DSCP or dot1p value. In addition, you 

can configure a drop precedence for incoming packets based on their DSCP value by using a DSCP 

color map. For more information, see 

DSCP Color Maps

.

•

Layer 2

 — QoS input policies allow you to rate police and set a dot1p value.

Output QoS policies regulate egress traffic. The regulation mechanisms for output QoS policies are 
bandwidth percentage, scheduler strict, rate shaping and WRED.

NOTE: 

When changing a "service-queue" configuration in a QoS policy map, all QoS rules are deleted and 

re-added automatically to ensure that the order of the rules is maintained. As a result, the Matched 
Packets value shown in the 

show qos statistics

 command is reset.

NOTE: 

To avoid issues misconfiguration causes, Dell Networking recommends configuring either DCBX 

or Egress QoS features, but not both simultaneously. If you enable both DCBX and Egress QoS at the 
same time, the DCBX configuration is applied and unexpected behavior occurs on the Egress QoS.

Quality of Service (QoS)

842

Summary of Contents for S4048T






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for S4048T

Panio HW2250K User Manual preview
HW2250K
Brand: Panio Pages: 5
Control 4 C4-SW120277 Series Installation Manual preview
C4-SW120277 Series
Brand: Control 4 Pages: 4
Penguin Edge RTM-ATCA-F140 Quick Start Manual preview
Edge RTM-ATCA-F140
Brand: Penguin Pages: 2
Enttec Hyperion 71025 User Manual preview
Hyperion 71025
Brand: Enttec Pages: 22
Pilz PSEN 1.2p-25 Operating Instructions Manual preview
PSEN 1.2p-25
Brand: Pilz Pages: 8
SMART-AVI DVN-8P Installation Manual preview
DVN-8P
Brand: SMART-AVI Pages: 2
Contemporary Controls CTRLink EISK8P-GT Installation Manual preview
CTRLink EISK8P-GT
Brand: Contemporary Controls Pages: 4
hager TX 206A Quick Start Manual preview
TX 206A
Brand: hager Pages: 4
ADTRAN Total Access 1210 Overview preview
Total Access 1210
Brand: ADTRAN Pages: 4
SOFLY HDSW4 User Manual preview
HDSW4
Brand: SOFLY Pages: 4
EtherWAN EX78900X Series Installation Manual preview
EX78900X Series
Brand: EtherWAN Pages: 2
Festo SME-8M-xxx-24V series Instructions preview
SME-8M-xxx-24V series
Brand: Festo Pages: 2
Vantron S108 Series User Manual preview
S108 Series
Brand: Vantron Pages: 29
Kramer VS-44DT User Manual preview
VS-44DT
Brand: Kramer Pages: 71
Fujitsu Control 3-0801 User Manual preview
Control 3-0801
Brand: Fujitsu Pages: 374
Fujitsu FS-1008MT Series Specification Sheet preview
FS-1008MT Series
Brand: Fujitsu Pages: 5
Crestron CEN-RGBHV Operation Manual preview
CEN-RGBHV
Brand: Crestron Pages: 56
GarrettCom MAGNUM 6KM Hardware Installation And User'S Manual preview
MAGNUM 6KM
Brand: GarrettCom Pages: 46

Brands by name

Popular brands

Load more brands