manualshive.com logo in svg

Dell PowerEdge T710, Hardware Owner'S Manual

Share
Download
Dell PowerEdge T710 Hardware Owner'S Manual Download Page 86

86

Installing System Components

Figure 3-4.

Opening and Closing the System

Closing the System

1

Ensure that all internal cables are connected and folded out of the way.

2

Ensure that no tools or extra parts are left inside the system. 

3

Align the cover with the slots in chassis and lower the cover into the 
chassis. See Figure 3-4.

4

Press the cover into the chassis until the latch locks into place. 

5

Turn the lock on the cover release latch clockwise to the locked position. 
See Figure 3-4.

6

Place the system upright and on its feet on a flat, stable surface.

7

Rotate the system feet outward.

1

cover release latch

2

cover release latch lock

3

system cover

4

system feet (4)

4

3

1

2

book.book  Page 86  Monday, June 15, 2009  11:33 AM

Summary of Contents for PowerEdge T710























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands