Dell PowerEdge R900 Hardware Owner'S Manual Download Page 110

Page: 110 / 190

110

Installing System Components

Activating the NIC TOE

To add TCP/IP Offload Engine (TOE) functionality to the system, install the

TOE NIC hardware key in the TOE_KEY socket on the system board. See

"System Board Jumpers and Connectors" on page 153.

I/O Riser

Removing the I/O Riser

CAUTION:

Only trained service technicians are authorized to remove the system

cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.

Open the system. See "Removing the Top Cover" on page 60.

Rotate the retention latch at the back of the card slot into the up position.

Push the card latch away from the card and lift on the card out of the

system.

Summary of Contents for PowerEdge R900































































































































































































Search results

Summary of Contents for PowerEdge R900

Reviews:

Related manuals for PowerEdge R900

Brands by name

Popular brands

Dell PowerEdge R900, Hardware Owner'S Manual

Search results

Summary of Contents for PowerEdge R900

Reviews:

Related manuals for PowerEdge R900

Brands by name

Popular brands