Dell Inspiron 7590 2in1 Service Manual Download | Manualshive

Page: 35 / 106

background image

Removing the I/O board

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

regulatory_compliance

.

Prerequisites

Remove the

.

Procedure

1. Using the pull tab, disconnect the I/O-board cable from the I/O board.
2. Open the latch and disconnect the fingerprint-reader cable from the I/O board.
3. Disconnect the coin-cell battery cable from the I/O board.
4. Remove the two screws (M2.5x4) that secure the right display hinge to the I/O board.
5. Lift the right display hinge from the I/O board.

6. Remove the screw (M2x3) that secures the I/O board to the palm-rest assembly.
7. Slide and lift the I/O board off the palm-rest assembly.

16

Removing the I/O board

35

«
...
33
34
35
36
37
...
»

Summary of Contents for Inspiron 7590 2in1











































































































Reviews:

No comments

Related manuals for Inspiron 7590 2in1

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 46

Brand: IBM Pages: 503

Brand: LEXIBOOK Pages: 2

Brand: Acer Pages: 73

Brand: Gateway Pages: 78

Brand: Hyundai Pages: 24

Brand: Acer Pages: 14

Brand: Acer Pages: 74

Latitude 14 Rugged

Brand: Dell Pages: 58

Brand: Dell Pages: 62

30 - Toughbook - Core 2 Duo

Brand: Panasonic Pages: 2

30 - Toughbook - Core 2 Duo

Brand: Panasonic Pages: 2

52 - Toughbook - Core 2 Duo P8400

Brand: Panasonic Pages: 29

Brand: Panasonic Pages: 30

CF-18JHU70TW TOUGHBOOK

Brand: Panasonic Pages: 38

CF-18BHAZXKM - Toughbook 18 Touchscreen PC Version

Brand: Panasonic Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands