Dell Inspiron 5421 Service Manual Download Page 64

Page: 64 / 127

4. Remove the

microSD card

5. Remove the

base cover

6. Remove the

memory module

7. Remove the

2280 solid-state drive

2230 solid-state drive

8. Remove the

WLAN card

9. Remove the

WWAN card

10. Remove the

battery

11. Remove the heat sink -

UMA

discrete

based on the system configuration.

12. Remove the

assembly inner frame

13. Remove the

system board

NOTE:

The system board can be removed with the heat sink attached in order to simplify the procedure and preserve

the thermal bond between the system board and heat sink.

About this task

The following images indicate the location of the keyboard assembly and provide a visual representation of the removal
procedure.

Steps

NOTE:

For models shipped with a USH module, disconnect the USH cable from the keyboard bracket.

Removing and installing components

Summary of Contents for Inspiron 5421
































































































































Search results

Summary of Contents for Inspiron 5421

Reviews:

Related manuals for Inspiron 5421

Brands by name

Popular brands

Dell Inspiron 5421, Service Manual

Search results

Summary of Contents for Inspiron 5421

Reviews:

Related manuals for Inspiron 5421

Brands by name

Popular brands