3. Align and place the WWAN-card bracket on the system board and WWAN card.
4. Replace the single (M2x3) screw to secure the WWAN-card bracket and WWAN card to the palm-rest assembly.
Next steps
1. Install the
.
2. Install the
3. Install the
.
4. Exit
.
After working inside your computer
.
Solid-state drives
Removing the 2230 solid-state drive
Prerequisites
Before working inside your computer
.
NOTE:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
NOTE:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Enter
.
3. Remove the
4. Remove the
.
5. Remove the
.
About this task
NOTE:
Depending on the configuration ordered, your computer may support a 2230 solid-state drive, or a 2280 solid-state
drive in M.2 slot.
NOTE:
This procedure applies only to computers shipped with a 2230 solid-state drive installed in M.2 slot.
The following image indicates the location of the 2230 solid-state drive that is installed and provides a visual representation of
the removal procedure.
Removing and installing components
27
Summary of Contents for Inspiron 5421
