Removing and installing components
Recommended tools
The procedures in this document may require the following tools:
•
Phillips screwdriver #1
•
Flat-head screwdriver
•
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Screw type
Quantity
Screw image
Base cover
Palm-rest and keyboard
assembly
M2x6
4
Battery
Palm-rest and keyboard
assembly
M2x2
4
Battery
Palm-rest and keyboard
assembly
M1.6x4
1
Touchpad bracket
Palm-rest and keyboard
assembly
M1.6x2
3
Touchpad
Palm-rest and keyboard
assembly
M1.6x2
2
I/O-board bracket
Palm-rest and keyboard
assembly
M2.5x3.5
2
I/O-board
Palm-rest and keyboard
assembly
M2x3
1
Solid-state drive
System board
M2x2.5
1
Wireless-card bracket
Wireless card and system
board
M2x2.5
1
Fan
System board
M2x3
2
Right display hinge
System board
M2x4
1
2
Removing and installing components
9
Summary of Contents for Inspiron 5391
Page 1: ...Inspiron 5391 Service Manual Regulatory Model P114G Regulatory Type P114G001 ...
Page 35: ...Removing and installing components 35 ...
Page 50: ...50 Removing and installing components ...
Page 51: ...Removing and installing components 51 ...