Steps
1. Connect the battery cable to the system board.
2. Replace the four screws (M2x2) that secure the battery to the palm-rest and keyboard assembly.
3. Replace the screw (M1.6x4) that secures the battery to the system board and palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
CAUTION:
Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended
that you note the BIOS setup program’s settings before removing the coin-cell battery.
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
14
Removing and installing components
Summary of Contents for Inspiron 5391
Page 1: ...Inspiron 5391 Service Manual Regulatory Model P114G Regulatory Type P114G001 ...
Page 35: ...Removing and installing components 35 ...
Page 50: ...50 Removing and installing components ...
Page 51: ...Removing and installing components 51 ...
