Steps
1. Connect the power-adapter port cable to the system board.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3. Align and place the display-cable bracket on the system board.
4. Replace the screw (M2.5x3.5) that secure the display-cable bracket to the system board.
5. Using the alignment posts, close the display hinges.
6. Replace the screw (M2x4) that secure the right display hinge to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of display assembly and provides a visual representation of the removal procedure.
34
Removing and installing components
Summary of Contents for Inspiron 5391
Page 1: ...Inspiron 5391 Service Manual Regulatory Model P114G Regulatory Type P114G001 ...
Page 35: ...Removing and installing components 35 ...
Page 50: ...50 Removing and installing components ...
Page 51: ...Removing and installing components 51 ...
