Steps
1. Align and place the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
3. Adhere the mylar tape that secures the heat sink to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Fan
Removing the fan
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of fan and provides a visual representation of the removal procedure.
22
Removing and installing components
Summary of Contents for Inspiron 5391
Page 1: ...Inspiron 5391 Service Manual Regulatory Model P114G Regulatory Type P114G001 ...
Page 35: ...Removing and installing components 35 ...
Page 50: ...50 Removing and installing components ...
Page 51: ...Removing and installing components 51 ...
