manualshive.com logo in svg

Dell Inspiron 5391, Service Manual

Share
Download
Dell Inspiron 5391 Service Manual Download Page 55

Display hinges

Removing the display hinges

Prerequisites

NOTE: 

This procedure is not applicable to computers shipped with a WWAN configuration.

1. Follow the procedure in 

Before working inside your computer

.

2. Remove the 

base cover

.

3. Remove the 

battery

.

4. Remove the 

WLAN card

.

5. Remove the 

display assembly

.

6. Remove the 

display bezel

.

About this task

The following image indicates the location of display hinges and provides a visual representation of the removal procedure.

Steps

1. Remove the four (M2.5x2.5) screws that secure the display hinges to the display back-cover.
2. Remove the two (M2x2) screws that secure the display hinges to the display back-cover.
3. Lift the display hinges off the display back-cover.

Installing the display hinges

Prerequisites

NOTE: 

This procedure is not applicable to computers shipped with a WWAN configuration.

If you are replacing a component, remove the existing component before performing the installation procedure.

Removing and installing components

55

Summary of Contents for Inspiron 5391


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands