Steps
1. Adhere the camera to the display cable (tape) and connect the camera cable to the camera and turn it over.
2. Using the alignment post, turn the camera over and adhere to the display back-cover.
3. Adhere the tape that secures the camera to the display back-cover.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
.
5. Install the
.
6. Install the
.
7. Follow the procedure in
After working inside your computer
.
Display back-cover
Removing the display back-cover
Prerequisites
NOTE:
This procedure is not applicable to computers shipped with a WWAN configuration.
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
4. Remove the
5. Remove the
.
6. Remove the
.
7. Remove the
8. Remove the
9. Remove the
.
58
Removing and installing components
Summary of Contents for Inspiron 5391
Page 1: ...Inspiron 5391 Service Manual Regulatory Model P114G Regulatory Type P114G001 ...
Page 35: ...Removing and installing components 35 ...
Page 50: ...50 Removing and installing components ...
Page 51: ...Removing and installing components 51 ...
