Dell Inspiron 5391 Page 45 Service Manual Download | Manualshive

Page: 45 / 81

background image

About this task

The following image indicates the location of system board and provides a visual representation of the removal procedure.

Steps

1. Remove the screw (M2x4) screw that secures the right display hinge to the system board.
2. Remove the screw (M2x4) that secures the display-cable bracket to the system board.
3. Remove the screw (M2.5x3.5) screw that secures the USB Type-C port bracket to the system board.
4. Peel the tape that secures the I/O-board cable to the system board.
5. Open the latch and disconnect the I/O-board cable from the system board.
6. Disconnect the speaker cable from the system board.
7. Open the latch and disconnect the fingerprint-reader cable from the system board.
8. Open the latch and disconnect the touchpad cable from the system board.
9. Open the latch and disconnect the keyboard cable from the system board.
10. Open the latch and disconnect the keyboard backlit cable from the system board.
11. Disconnect the coin-cell battery cable from the system board.
12. Disconnect the power-adapter port cable from the system board.
13. Using the pull tab, disconnect the display cable from the system board.
14. Gently release the ports on the system board from the slots on the palm-rest and keyboard assembly and lift the system board off the

palm-rest and keyboard assembly.

Removing and installing components

45

«
...
43
44
45
46
47
...
»

Summary of Contents for Inspiron 5391


















































































Reviews:

No comments

Related manuals for Inspiron 5391

Brand: Gateway Pages: 81

Brand: Medion Pages: 306

Brand: IBM Pages: 10

Brand: AMILO Pages: 70

TravelMate 4750

Brand: Acer Pages: 315

TravelMate 520 Series

Brand: Acer Pages: 83

Brand: Lenovo Pages: 70

Brand: Asus Pages: 30

Brand: Asus Pages: 30

Brand: Asus Pages: 116

Brand: Asus Pages: 12

ROG Ranger BP3703

Brand: Asus Pages: 11

Brand: Asus Pages: 112

Brand: Asus Pages: 31

Chromebook Spin 314

Brand: Acer Pages: 6

chromebook CD570M

Brand: Acer Pages: 9

Chromebook 11 C733

Brand: Acer Pages: 6

eMachines E510 Series

Brand: Acer Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands