5. Adhere the tape that secures the I/O board to the I/O board.
6. Using the alignment posts, close the display hinges.
7. Replace the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Follow the procedure in
After working inside your computer
.
Power-button board
Removing the power-button board
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
4. Remove the
5. Remove the
.
6. Remove the
About this task
The following image indicates the location of power button and provides a visual representation of the removal procedure.
Steps
1. Remove the screw (M1.6x2) that secures the power-button bracket to the palm-rest and keyboard assembly.
2. Remove the screw (M1.6x2) that secures the power-button board to the palm-rest and keyboard assembly and lift the power-button
board off the palm-rest and keyboard assembly.
Removing and installing components
41
Summary of Contents for Inspiron 5391
Page 1: ...Inspiron 5391 Service Manual Regulatory Model P114G Regulatory Type P114G001 ...
Page 35: ...Removing and installing components 35 ...
Page 50: ...50 Removing and installing components ...
Page 51: ...Removing and installing components 51 ...
