Removing the stand assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base cover
.
2
Remove the
wireless card
.
3
Remove the
computer base
.
4
Remove the
back cover
.
5
Remove the
camera
.
6
Remove the
microphones
.
Procedure
1
Disconnect the converter-board cable and control-buttons board cable
from the converter board.
2
Disconnect the power-button cable from the control-buttons board
cable.
76
Summary of Contents for Inspiron 24
