Removing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Remove the screws that secure the base cover to the stand.
1
screws (8)
2
base cover
2
Using a plastic scribe, pry up the base cover to release the ports on the
system board from the slots on the base cover.
21
Summary of Contents for Inspiron 24
