Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on the computer
base.
2
Replace the screws that secure the fan to the computer base.
3
Connect the fan cable to the system board.
4
Adhere the tape over the heat sink and fan.
Post-requisites
1
Replace the
computer base
.
2
Replace the
wireless card
.
3
Replace the
base cover
.
50
Summary of Contents for Inspiron 24
