Dell Inspiron 24, Service Manual

Page: 89 / 101

Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the display panel on a flat and clean surface.
2 Align the screw holes on the brackets with the screw holes on the display
panel.
3 Replace the screws that secure the brackets to the display panel.
4 Align the screw holes on the brackets with the screw holes on the display
bezel and place the display panel on the display bezel.
NOTE: Ensure that no cables are placed under the display panel.
5 Adhere the cable on the display panel.
6 Slide the cables into the connectors on the display panel and close the
latches to secure the cables.
7 Replace the screws that secure the display assembly to the display bezel.
8 Align the screw holes on the middle cover to the screw holes on the
display bezel.
9 Replace the screws that secure the middle cover to the display bezel.
10 Connect the display-backlight cable to the middle cover.
11 Connect the power-button cable to the middle cover.
12 Adhere the tape to the power-button module.
Post-requisites
1 Replace the stand assembly .
2 Replace the microphones .
3 Replace the camera .
4 Replace the back cover .
5 Replace the computer base .
89