Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Adhere the coin-cell battery to the system board.
2
Route the cable through the routing guide on the system board.
3
Connect the coin-cell battery cable to the system board.
Post-requisites
Replace the
base cover
.
30
Summary of Contents for Inspiron 24
