Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base cover
.
2
Remove the
wireless card
.
3
Remove the
computer base
.
4
Remove the
back cover
.
NOTE: Depending on the configuration you ordered, the
appearance of the camera may differ.
Procedure for removing the 3D camera
1
Disconnect the camera cable from the camera.
62
Summary of Contents for Inspiron 24
