Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure for replacing the 3D camera
1
Connect the camera cable to the camera.
2
Slide the camera into the camera bracket.
3
Align the notch on the camera bracket with the tab on the display bezel.
4
Align the screw holes on the camera assembly with the screw holes on
the display bezel.
5
Replace the screws that secure the camera assembly to the display bezel.
6
Adhere the foil over the camera assembly.
Procedure for replacing the 2D camera
1
Connect the camera cable to the camera and turn it over.
2
Slide the camera into the camera bracket.
3
Align the screw holes on the camera assembly with the screw holes on
the display bezel.
4
Replace the screws that secure the camera assembly to the display bezel.
Post-requisites
1
Replace the
back cover
.
2
Replace the
computer base
.
3
Replace the
wireless card
.
4
Replace the
base cover
.
66
Summary of Contents for Inspiron 24
