Removing the memory module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Loosen the captive screw that secures the memory-module cover to the
base cover.
2
Lift and slide the memory-module cover off the base cover.
1
captive screw
2
memory-module cover
3
base cover
3
Using your fingertips, spread apart the securing clips at each end of the
memory-module slot until the memory module pops up.
17
Summary of Contents for Inspiron 24
