Replacing the control-buttons
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the control-buttons board on the buttons bracket.
2
Place the control-buttons board assembly into the slot on the display
bezel and snap it in place.
Post-requisites
1
Replace the
display panel
.
2
Replace the
power-button module
.
3
Replace the
microphones
.
4
Replace the
camera
.
5
Replace the
stand assembly
.
6
Replace the
back cover
.
7
Replace the
computer base
.
8
Replace the
wireless card
.
9
Replace the
base cover
.
94
Summary of Contents for Inspiron 24
