Dell EMC VxFlex Ready Node 13G, Manual

Page: 78 / 84

Table 9 Hardware ISO contents
Description Version
Drivers for OS Deployment Application 16.03.00 A00
Expander Backplane Firmware 3.03 A00
PowerEdge Server BIOS 2.2.5
Backplane Firmware 2.23 A00
SAS HBA330 Storage Controller Firmware 13.17.03.00 A01
PERC H330 Storage Controller Firmware 25.4.0.0017 A04
PERC H730 Storage Controller Firmware 25.4.0.0017 A06
Intel x520/i350 NIC Firmware 17.0.12 A00
iDRAC with Lifecycle Controller Firmware 2.40.40.40 A00
Note
Some of the firmware listed in the table is dependent on the VxFlex Ready Node
hardware configuration. The Hardware ISO attempts to apply all firmware updates,
but only those updates that are compatible will be installed.
Applying settings using RACADM
The individual firmware files are also available on the
Dell Support website, and can
easily be installed using the following remote RACADM command:
racadm -r <dracIP> -u root -p calvin update –f <filename.exe>
Where:
l
<dracIP> is the iDRAC IP address
l
<filename.exe> is the name of the Dell Windows update packages
Note
The default password is calvin.
Configuration settings
The Hardware ISO runs a script that automatically configures the BIOS and iDRAC
settings listed in the table below. Some settings are dependent on the server model.
Table 10 Hardware ISO configuration settings
Description Setting Value
Server BIOS Boot Sequence BIOS.BiosBootSettings.BootS
eq HardDisk.List.1-1
Hard Disk Boot Order BIOS.BiosBootSettings.HddS
eq Disk.SATAEmbedded.J-1,RAI
D.Integrated.1-1
or
Reference material
78 Hardware Configuration and Operating System Installation Guide - Windows Servers