Dell EMC VxFlex Ready Node 13G Manual Download Page 3

Page: 3 / 84

Overview.....................................................................................................12
VxFlex OS component requirements........................................................... 12

VxFlex OS cluster components.......................................................12
Physical server requirements......................................................... 13
Supported operating systems.........................................................13
VxFlex OS Gateway server requirements....................................... 14

Prerequisites............................................................................................... 14

Supported hardware configurations............................................................ 15

Configuring the Hardware

Set up the BMC (iDRAC) IP address and BIOS........................................... 18
Verify the status of the system hardware, storage controller, and disks -
13G servers.................................................................................................20
Open the KVM console - 13G servers.......................................................... 21
Updating the BIOS, firmware and settings..................................................22

Update the hardware using the iDRAC virtual console................... 23

Installing the Operating System

System requirements................................................................................. 26
Map the ISO file on a VxFlex Ready Node server........................................26
Installing the Windows OS on a VxFlex Ready Node server........................ 27

Network Architecture and Physical Connectivity

Networking connectivity architecture and cabling best practice................ 30
Network prerequisites................................................................................ 32

Port Configuration

Determine the 2U1N node type...................................................................36
Server node port designations....................................................................36

Configure the ports....................................................................... 38

Installing the drivers

Clear the OEMDRV memory....................................................................... 48
Install the VxFlex OS drivers.......................................................................48

Figures

Tables

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

CONTENTS

Hardware Configuration and Operating System Installation Guide - Windows Servers

Summary of Contents for EMC VxFlex Ready Node 13G





















































































Search results

Summary of Contents for EMC VxFlex Ready Node 13G

Reviews:

Related manuals for EMC VxFlex Ready Node 13G

Brands by name

Popular brands

Dell EMC VxFlex Ready Node 13G, Manual

Search results

Summary of Contents for EMC VxFlex Ready Node 13G

Reviews:

Related manuals for EMC VxFlex Ready Node 13G

Brands by name

Popular brands