Dell EMC VxFlex Ready Node 13G, Manual

Page: 66 / 84

Results
You can use the DAS Cache utility, either from the console or via RDP.
To run fiocli:
l
Open a command line window with administrator's privileges and switch to the
C:
\Program Files\SanDisk DAS Cache
directory.
or
l
Open a command line window through Windows Explorer:
1. In Windows Explorer, open the
C:\Program Files\SanDisk DAS Cache
directory.
2. Press Shift and right-click in the directory, then select Open command
window here.
Run the fiocli commands in the following format:
fiocli <command>
.
For example, to view help, run
fiocli h
.
Additional actions after installing DAS Cache
You are required to perform these additional actions after installing DAS Cache:
Procedure
1. Log in to the node.
2. Check for a partition on the SSD disk that you want to allocate for DAS Cache:
a. From the Windows Start menu, open Disk Management.
The Disk Management window appears:
Additional Configurations
66 Hardware Configuration and Operating System Installation Guide - Windows Servers