Dell Dimension 8300 Series User Manual Download

Page: 92 / 146

A d d i n g Pa r t s

www

.dell.com | support.dell.com

Pull the card up and out of the card clip.

Installing an AGP Card

To add or replace the card, press the card lever toward the PCI connector and gently
press the card into the AGP connector until it clicks into place.

Release the card lever, ensuring that the tab fits into the notch on the front end of
the card.

Secure the card by lowering the hinged lever on the back panel.

Close the computer cover (see page 100).

tab

card clip

lever

notch

PCI connector

AGP connector

back of computer

card clip
lever

AGP card

card clip

slot connector

Summary of Contents for Dimension 8300 Series



















































































































































Search results

Summary of Contents for Dimension 8300 Series

Reviews:

Related manuals for Dimension 8300 Series

Brands by name

Popular brands

Dell Dimension 8300 Series, User Manual

Search results

Summary of Contents for Dimension 8300 Series

Reviews:

Related manuals for Dimension 8300 Series

Brands by name

Popular brands