manualshive.com logo in svg

Dell Dimension 8300 Series, User Manual

Share
Download
Dell Dimension 8300 Series User Manual Download Page 19

S e t t i n g   U p   a n d   U s i n g   Yo u r   C o m p u t e r

19

3

Attach the parallel printer cable to the parallel connector on the computer and tighten 
the two screws. Attach the cable to the connector on the printer and snap the two clips 
into the two notches. 

4

Turn on the printer and then turn on the computer. If the 

Add New Hardware Wizard

 

window appears, click 

Cancel

.

5

Install the printer driver if necessary. See the documentation that came with 
your printer.

Connecting a USB Printer

 NOTE: 

You can connect USB devices while the computer is turned on.

1

Complete the operating system setup if you have not already done so.

2

Install the printer driver if necessary. See the documentation that came with 
your printer.

parallel printer 
cable

parallel connector on computer

connector on printer

screws (2)

clips (2)

notches (2)

Summary of Contents for Dimension 8300 Series



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands