Dell 5210n Mono Laser Printer, Service Manual

Page: 77 / 430

Diagnostic information
2-35
Insert <
tray
> <
tray
>=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5.
The printer detects a tray needs to be inserted. The printer does not continue
until it detects the tray is inserted.
Note:
This situation usually occurs when the tray is refilled during a job. To
refill a tray during a printing session, press and wait for pages to reach
the output bin before refilling the tray.
The following actions may be taken:
• Insert the requested tray.
• Press
until Busy/Waiting displays. The following selections are
available:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
“Paper size sensing service
check” on page 2-114
or
“Input tray(s) service check” on page 2-103
.
Install Bin
x
or Cancel Job
Bin
x
=Bin 1, Bin 2, or Bin 3.
This message is displayed when a paper handling option has been hot
unplugged. The printer requires the reinstallation of the option to print a page
which has been formatted by the interpreter before the option was removed.
The following actions may be taken:
• Install the option.
• Press
until Busy/Waiting displays. Select one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
“Input tray(s) service check” on
page 2-103
.
Install Duplex
or Cancel Job
This message is displayed when a duplex option has been hot unplugged.
The printer requires the reinstallation of the option to print a page which has
been formatted by the interpreter before the option was removed.
The following actions may be taken:
• Install the duplex option.
• Press
until Busy/Waiting displays. Select one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
“Duplex option service check” on
page 2-82
.
User attendance messages (continued)
Error
code Sub
code
Primary message Description/action