Dell 5210n Mono Laser Printer, Service Manual, Page: 408 / 430

A-20
Service Manual
Linking output bins
Linking output bins lets you create a single output source so the printer can automatically switch output to the
next available bin. You can also set the output type for media such as card stock or envelope sizes that cannot
be sent to an optional output bin. For more information on the values available to configure your output bins,
refer to the
Menus and Messages Guide
.
Note:
The bin sequence for linking always starts with the Standard Bin and proceeds from the Bin nearest to
the floor to the Bin farthest from the floor.
To link output bins:
1.
Press on the operator panel.
2.
Press until the appears next to Paper Menu .
3.
Press .
4.
Press until the appears next to Bin Setup .
5.
Press .
6.
Press until the appears next to Configure Bins .
7.
Press .
8.
Press until the appears next to Link .
9.
Press .
The printer returns to the
Ready state.