Dell 5210n Mono Laser Printer, Service Manual

Page: 44 / 430

2-2
Service Manual
Understanding the printer operator panel
The operator panel on your printer is a 4-line back-lit gray scale display that can show both graphics and text.
The
Back
,
Menu
, and
Stop
buttons are located to the left of the display, the navigation buttons are located
below the display, and the numeric pad is located to the right of the display.
The use of the buttons and the layout of the display panel are described in the following table.
Operator panel
Button Function
Back
Press the
Back
button to return to the last screen you viewed.
Note:
Changes made on the screen will not be applied if you press the
Back
button.
Menu
Press the
Menu
button to open the menu index.
Note:
The printer must be in the Ready state to access the menu index. A
message indicating the menus are unavailable will appear if the printer is not
ready.
Stop
Press
Stop
to stop the mechanical operation of the printer. After pressing
Stop
,
the message Stopping is displayed. When the printer has stopped, the status
line in the operator panel will show Stopped , and a list of options will appear.
Navigation buttons
The
Up
or
Down
buttons are used to move up and down lists.
When navigating through a list using the
Up
or
Down
button, the cursor
moves one line at a time. Pressing the
Down
button at the bottom of the
screen changes the screen to the next whole page.
The
Left
or
Right
buttons are used to move within a screen such as
moving from one menu index item to another. They are also used to
scroll through text that will not fit on the screen.
The
Select
button is used to initiate action on a selection. Press
Select
when the cursor appears next to the selection you want such as
following a link, submitting a configuration item, or when you want to
start or cancel a job.
Navigation buttons
Numeric pad
Display panel
Indicator light
USB port
Select button