Dell 5210n Mono Laser Printer, Service Manual, Page: 175 / 430

Diagnostic aids
3-3
DUPLEX TESTS
(if installed)
Quick Test See
“Quick Test (duplex)” on page 3-9
Top Margin See
“Top Margin (duplex)” on page 3-10
Sensor Test See
“Sensor Test (duplex)” on page 3-10
Motor Test See
“Motor Test (duplex)” on page 3-11
Duplex Feed 1 See
“Duplex Feed 1” on page 3-12
Duplex Feed 2 See
“Duplex Feed 2” on page 3-12
INPUT TRAY TESTS
Feed Tests See
“Feed Tests (input tray)” on page 3-13
Sensor Test See
“Sensor Test (input tray)” on page 3-13
OUTPUT BIN TESTS
Feed Tests See
“Feed Tests (output bins)” on page 3-14
Feed To All Bins See
“Feed To All Bins” on page 3-14
Sensor Test See
“Sensor Test (standard output bin)” on page 3-15
Diverter Test (if 5-bin
installed)
See
“Diverter Test” on page 3-16
FINISHER TESTS
(if installed)
Staple Test See
“Staple Test” on page 3-17
Feed Tests See
“Feed Tests (finisher)” on page 3-17
Sensor Test See
“Sensor Test (finisher)” on page 3-17
BASE SENSOR TEST
See
“BASE SENSOR TEST” on page 3-18
Toner
Input
Output
DEVICE TESTS
Quick Disk Test (if installed) See
“Quick Disk Test” on page 3-18
Disk Test/Clean (if installed) See
“Disk Test/Clean” on page 3-19
Flash Test (if installed) See
“Flash Test” on page 3-19
PRINTER SETUP
Defaults See
“Defaults” on page 3-20
Page Count See
“Page Count” on page 3-20
Perm Page Count See
“Perm Page Count (permanent page count)” on page 3-20
Serial Number See
“Serial Number” on page 3-20
Envelope Enhance See
“Envelope Enhance” on page 3-20
Engine Setting 1 through 4 See
“Engine Setting 1 through 4” on page 3-20
Model Name See
“Model Name” on page 3-20
Configuration ID See
“Configuration ID” on page 3-21
Edge to Edge See
“Edge to Edge” on page 3-21
Par
S
Strobe Adj See
“Parallel strobe adjustment (Par x Strobe Adj)” on page 3-21
Par
x
Strobe Adj (if additional
parallel options are installed)
Diagnostics mode tests (continued)