Dell 2355dn, User Manual

Page: 176 / 344

175
Scanning by a network connection
If you have connected your machine to a network and set up network parameters correctly, you
can scan and send images over the network.
Preparing for network scanning
Before using your machine’s network scanning features, you need to configure the following
settings depending on your scan destination:
• Registering as an authorized user for scanning to Email
• Setting up SMTP server for scanning to Email
User authentication for network scanning
To send an email, or Network, you need to register local or network authorized users using
Embedded Web Service .
• If user authentication is activated, only authorized users in local or server DB (LDAP,
Kerberos) can send scan data to network (Email, Network) using the machine.
• To use user authentication for network scanning, you need to register network or local
authentication configuration using
Embedded Web Service .
• User authentication has 3 types as no authentication (Default), network authentication and
local Authentication.
Registering authorized users
1
Enter your machine’s IP address as the URL in a browser and click Go to access the web site
of your machine.
2
Click Email Settings Authentication .
3
Select User Authentication .
4
Enter your auth ID, password.
You need to enter the registered user ID and password in the machine when you scanning to
email from the control panel.
5
Click Submit .
Email Forward You can set the printer to forward all of the outgoing or incoming faxes to specified
e-mail addresses. See "Fax Forward to E-mail addresses".
Control Access You can protect the Email Setup feature with a passcode.
a If you want to use the host name in SMTP server, you must set the DNS server first.
Option Description