Dell 1250 Color User Manual Download Page 158

Page: 158 / 174

156

Troubleshooting

Noise

NOTE:

In this section, some procedures use the Tool Box or the Status Monitor.

For more information about Tool Box, see "Understanding the Tool Box Menus" on

page 87.

For more information about Status Monitor, see "Printer Status Window" on

page 103.

Action

Yes

Locate the cause of the problem by removing

the toner cartridges.

Remove the toner cartridges. See "Replacing

Toner Cartridges" on page 118.

Launch the Tool Box, and click

Machine

Check

on the

Diagnosis

tab.

Select

Main Motor Operation Check

from

the drop-down list box, and click the

Start

button.

Click the

Play of Sound

button to check the

motor sound.

Does the noise generated from the printer

match with the noise from the

Play of Sound

button?

Contact Dell.

Go to action 2.

Summary of Contents for 1250 Color















































































































































































Search results

Summary of Contents for 1250 Color

Reviews:

Related manuals for 1250 Color

Brands by name

Popular brands

Dell 1250 Color, User Manual

Search results

Summary of Contents for 1250 Color

Reviews:

Related manuals for 1250 Color

Brands by name

Popular brands