Dell 1250 Color User Manual Download Page 155

Page: 155 / 174

Troubleshooting

153

The top margins is incorrect

Load the envelope long edge feed in the MPF

with the flap open and facing up. For details,

see "When Loading Envelope#10, DL, or

Monarch" on page 64.
Is the problem recovered?

The task is

complete.

Go to action

4b.

Load the envelope in the MPF with the flap

open and facing up. For details, see "When

Loading C5" on page 64.
Is the problem recovered?

The task is

complete.

Contact Dell.

Use a different size envelope.
Is the problem recovered?

The task is

complete.

Contact Dell.

Action

Yes

Ensure that the margins are set correctly on the

application being used.
Is the problem recovered?

The task is

complete.

Contact Dell.

Action

Yes

Summary of Contents for 1250 Color















































































































































































Search results

Summary of Contents for 1250 Color

Reviews:

Related manuals for 1250 Color

Brands by name

Popular brands

Dell 1250 Color, User Manual

Search results

Summary of Contents for 1250 Color

Reviews:

Related manuals for 1250 Color

Brands by name

Popular brands