Dell 1250 Color User Manual Download Page 150

Page: 150 / 174

148

Troubleshooting

Mottle

Ghosting

Action

Yes

Clean inside the printer and performing test

print.

Clean inside the printer by using the cleaning

rod. See "Cleaning Inside the Printer" on

page 122.

Click

Print Test Page

Properties

of the

printer driver.

Is the problem recovered?

The task is

complete.

Contact Dell.

Action

Yes

Adjust the transfer bias.

Launch the Tool Box, click

Adjust BTR

on the

Printer Maintenance

tab.

Adjust the setting for the type of print media

being used.

Is the problem recovered?

The task is

complete.

Go to action 2.

If you use non-recommended print media, use

the print media recommended for the printer.
Is the problem recovered?

The task is

complete.

Contact Dell.

Summary of Contents for 1250 Color















































































































































































Search results

Summary of Contents for 1250 Color

Reviews:

Related manuals for 1250 Color

Brands by name

Popular brands

Dell 1250 Color, User Manual

Search results

Summary of Contents for 1250 Color

Reviews:

Related manuals for 1250 Color

Brands by name

Popular brands